The method of preparing and testing uranium-zinc acetic acid
If you want to test something, you need to understand the method. Today, the test of uranium-zinc acetic acid (Uranyl Zinc Acetate) is quite important.

Those who make uranium-zinc acetic acid should prepare all the necessary things first. In the clean vessel, take the relevant agents of uranium in an appropriate way, and slowly add the zinc-containing agent in a certain proportion. When the two are blended, it is advisable to control the temperature and not make it too strong or too slow. And when adding acetic acid, you should also pay attention, pour it in slowly, and stir it lightly at the same time to make it evenly mixed. In this way, after some preparation, a solution of uranium-zinc acetic acid can be obtained.

As for the method of testing, if you want to know whether something contains ingredients related to uranium, zinc and acetic acid, you can take an appropriate amount of the thing to be tested, treat it with a specific method, and drop it into the prepared uranium, zinc and acetic acid solution. If you see a specific phenomenon appearing, such as color change, or precipitation, you can know the approximate composition contained in it. The key to this is all at the time of operation, the accuracy of the method, and the meticulous observation, in order to obtain a definite result.