The method of making lead acetate
There is a technique of making lead acetate in the world, and the method is quite detailed. Take the lead block first, choose the pure one, and remove the impurities. Cut it with a sharp blade, so that it becomes a thin sheet, like a cicada wing, with uniform thickness.

Prepare a kettle with clay, clean and unsullied. Fill it with water, the amount should be moderate, not too much or too little. Put lead tablets in water, and gradually add acetic acid. For acetic acid, it must be fine and pure, without the slightest residue.

Make a fire under the kettle, and the fire should be mild and not violent. Stir from time to time to make the lead sheet and acetic acid fully blend. See the bubbles in the kettle, like boiling beads, this is the appearance of a reaction. When the bubbles are gradually diluted, the color of the solution changes to light gold, and the view is clear, it can be seen that the reaction will be completed.

is to stop the fire and let the sheet stand. Take a fine silk cloth, cover it on the drain, pour the solution in the kettle on the cloth, drain it, and remove its dross.

Take the clean kettle again, fill the clear liquid, and then warm it with a low heat. Let the water gradually steam, and the solution gradually thickens. Looking at its concentration, at an appropriate time, remove the kettle from the fire, put it in a cool place, and let it cool. Russia, it can be seen that there are crystals precipitating at the bottom of the kettle, which is lead acetate.

When receiving crystals, it is advisable to take it easy and not be impatient, for fear of damaging its shape. The resulting crystalline salt is white and radiant, like broken jade. Hide it in a sealed vessel, do not let it get damp, so as to preserve its quality.

This method of making lead acetate must be careful, observe its changes, and according to its rhythm, it can become a good thing.