"Method for Producing Lead Acetate"

If you want to make lead acetate, you can prepare lead and acetic acid. First take an appropriate amount of lead, and wash it with water to remove its impurities. Lead is heavy in quality and dark in color, and stable in nature.

Place lead in an open vessel for the second time, and slowly inject acetic acid into it. Acetic acid has a sour smell, clear in color and strong in nature. When the two meet, they change.

At that time, there are slight bubbles rising in the visible vessel, looming, like a fountain. Although its state is slow, it is quiet. And this process should be placed in a ventilated place to prevent odor from accumulating.

When the reaction is complete, the solution becomes clearer. Or a little unmelted lead shavings can be filtered with a muslin or sieve to make the liquid pure.

Then, move the resulting liquid to a clean dish and boil slowly over low heat. The fire should not be fierce to prevent the liquid from splashing and avoid its qualitative change. When boiling, the water vapor gradually dissipates and the liquid gradually thickens.

When it cools, lead acetate can be obtained. This product is crystalline, or white, or slightly light-colored, placed on the case, shining and shiny, which is the work of making lead acetate.