The method of making aluminum acetate
If you want to make aluminum acetate, you should follow a certain method. Prepare all the things you need first, and the materials should be fine and good.

In a clean vessel, put an appropriate amount of a certain material (choose the material according to the party), and slowly inject other things. During the process, you need to pay attention to the movement and stillness. When noting, its speed should be slow, and it should not be overly aggressive, causing other changes.

After the injection is completed, it should be raised at a moderate temperature. The level of temperature is related to success or failure, and it should not be careless. Or put it on a small fire, or adjust the temperature according to other methods, so that it is moderate.

When it is adapted, observe it carefully. If you see a suitable image, you will get the method. Then, divide its quality with a good method, take its essence, and discard its dross.

With so many twists and turns, you can get self-made aluminum acetate. However, every step needs to be done with caution. If there is a slight mistake, you may not achieve good results. Only by working hard can you achieve this skill and make suitable aluminum acetate.