Formula of Aluminum Acetate
If you want to make aluminum acetate, you need to understand the method. Aluminum acetate is also the product of transformation. The raw materials involved in the formula and the method of preparation are also.

First of all, the raw materials are aluminum, and pure aluminum or aluminum-containing ore can be used to make it clean and good. The second is acetic acid. The degree of acid should be appropriate, and it should not be too concentrated or too light. If it is too concentrated, it will be counter-intense, and if it is too light, it will have little effect.

As for the method of making, put the aluminum in the utensils and slowly inject acetic acid. At the beginning, it should be heated with a slight heat to promote its phase transformation. In the meantime, it needs to be stirred frequently to make it uniform. Observe it, there is gas escaping, and the liquid gradually changes. When it should stop, the state of the liquid will be fixed. This is the liquid of aluminum acetate.

However, if you want to get pure aluminum acetate, you need to go behind it. Or use the method of steaming to make the water in the liquid gradually disappear, the solute gradually thickens, and finally obtain the crystal aluminum acetate. Or through filtration and analysis, remove impurities and keep pure, so as to meet the desired quality.

When doing it, be sure to abide by the rules and be safe. The amount of raw materials, the degree of temperature, and the duration of time are all related to success. Good observation of changes and precise control of various causes can obtain good aluminum acetate, which can be used in various industries, or medicine, or work, all of which are beneficial.