On the method of ethyl acetate to kill cans
Those who want to make ethyl acetate to kill cans must study the rationale in detail, prepare their materials carefully, and apply their techniques carefully to obtain their effect.

First talk about the selection of materials. For cans, it is necessary to have good airtightness, solid material, preferably glass, which is transparent and easy to observe the changes in the contents. Ethyl acetate, when taken pure and free of impurities, is the key agent for death. Its properties evaporate rapidly, and it can reach the target quickly, causing it to faint.

As for the production method, first clean the tank, remove dust and remove filth, and make sure it is clean. After pouring ethyl acetate into the bottom of the tank, the amount should be considered. If it is too much, it will be wasteful and easy to evaporate too much, and if it is less, it will be ineffective. Then soak the ethyl acetate with cotton ball or filter paper and place it in the tank, so that it evaporates slowly and permeates the tank.

When using, gently place the thing you want to kill in the tank and quickly close the mouth of the tank to prevent air leakage. Russia, the gas of ethyl acetate gradually diffuses, and the thing is smoked by it, the breath gradually weakens, the action gradually slows, and finally it dies without moving. The beauty of this can is that it can be used in a gentle state, so that the thing does not struggle and quietly passes away.

If you use this can, you should also be cautious. Ethyl acetate is flammable, so open flames must be prohibited where it is used; and its gas is pungent and slightly harmful to people. Use it to quickly move to a ventilated place to dissipate its gas and avoid hidden dangers.

All these methods are necessary for the preparation of cans with ethyl acetate, and if you follow them, you can get good results.