Treatment of Ethyl Acetate in the Laboratory
The treatment of ethyl acetate in the laboratory is related to experimental safety and environmental suitability, and strict procedures need to be followed.

Ethyl acetate, volatile and flammable, improper handling, easy to cause safety hazards. After the experiment, collect the waste liquid containing ethyl acetate, do not dump it at will. Special waste liquid containers should be prepared and clearly marked to prevent confusion.

Treatment after collection can be distilled. According to the difference in boiling point between ethyl acetate and other impurities, heat distillation. The installation needs to be stable to ensure good air tightness. During the heating process, pay close attention to temperature changes. When it reaches the boiling point of ethyl acetate, it is vaporized and recovered by condenser liquefaction.

If the amount is small, it can also be handed over to professional waste treatment institutions. Such institutions are equipped with professional equipment and technology, which can be safely disposed of in accordance with regulations and reduce the risk of environmental pollution.

When handling ethyl acetate, the experimenter must take good protection. Wear laboratory clothes, wear protective gloves and goggles, operate in good ventilation, avoid inhalation of volatile gases, and prevent skin contact.

Proper handling of ethyl acetate in the laboratory, in order to ensure the safety of the experiment and maintain the key link of environmental cleanliness, everyone should strictly abide by the norms and not slack off.