The method of cellulose acetate injection
There is a technique today. It is the technology of molding materials, and it is related to the injection molding of cellulose acetate. Cellulose acetate is specific in nature and can be used for all kinds of utensils.

At the beginning of its injection molding, choose the material carefully. The purity of the material and the quality of the material are related to the success or failure of the plastic product. Select the concentrate to achieve good results.

Then, adjust the machine to suit. Control the temperature to a wonderful state. If the temperature is high, the material will melt and lose shape. If the temperature is low, it will be difficult to flow, and it will not reach the corners of the mold. It is also heavy at speed. If it is fast, the gas will be difficult to escape, and if it is slow, it will be time-consuming and inefficient.

The molding service is fine, the pattern is fine and the wall is slippery, so that the material enters the mold, flows smoothly and fills the gap, without defects or traps.

When injection molding, the craftsman's eyes are focused on the flow of the material and the change of the mold. If there is a slight difference, it will be adjusted, and the plastic product will be finished.

After the plastic product is initially formed and molded, it also needs to be taken care of. Repair its edges, adjust its shape, and remove its defects.

In this way, by using the method of cellulose acetate injection molding, you can get a good tool for use in various industries, for the benefit of the world.