On the combination of calcium acetic acid and aluminum sulfate
There are things in the world called calcium acetic acid, and there are aluminum sulfate. The method of combining the two is quite important.

Calcium acetic acid is mild in nature, pure in color and pure in quality. Aluminum sulfate is white in color and dry in nature. If you want to combine the two, check its properties and examine its changes.

First take an appropriate amount of calcium acetic acid and put it in a purifier. Use a low heat to warm it so that it melts without boiling. Next, slowly add aluminum sulfate into it, and stir it lightly with a wood dagger. Stir at a speed that is not fast or slow, so that the two are evenly combined.

When the initial combination, the liquid color changes slightly, or there is a slight foam. This is the sign of the phase transformation of the two. Continue to stir it, observe its color and observe its state. When the foam stops and the color is fixed, the liquid gradually clarifies, then the work of the combination is almost complete.

However, after the combination, there is still a need for follow-up. With a fine sieve, filter the residue, so that the liquid is pure. Bake it at low temperature, and wait for it to gradually condense, before it becomes a usable thing.

The method of combining calcium acetic acid and aluminum sulfate, unless you are familiar with its properties and observe its changes in detail, you cannot get a good thing. Be careful to do it, in order to achieve its work.