The method of making aluminum acetate drops
Where aluminum acetate drops are made, the materials required are aluminum and acetic acid. First, take an appropriate amount of aluminum and file it into debris to increase the surface area and facilitate the reaction. Place the aluminum chips in a clean vessel and slowly inject acetic acid. When the two meet, they will react, and bubbles will escape. This is the image of hydrogen generation.

When reacting, it is appropriate to control its temperature and do not overdo it. You can place the vessel in a cool place, or use a cold water bath to adjust it. When the reaction slows down and the bubbles decrease, let it stand for a while to settle the unreacted aluminum chips.

Then, take the supernatant and filter it with filter paper to remove impurities to obtain a clear aluminum acetate solution. If you want to get the dripping state, you can use a dropper and other devices to drip into a clean bottle and keep it sealed. When used, take an appropriate amount according to the disease, and it may be effective for various diseases.